ALUBANG panel is easy to process. All cutting, milling,
punching, slotting, side-folding and curving can be
easily fulfilled by simple tools used for processing
timber and metal. It can be shapes, such as curved,
reserved curves, comer and sharp curves, according to
requirements of building design. It is incomparable to
other decorating material.
(1) Saw cutting
Circular saws and vertical saws for woodworking can cut
panels easily. We recommend the carbide tip blade made
aluminum and plastic.
A square shear is the most efficient method for sizing
quantity of panels. Some shear droop may occur at the
ALUBANG can be joined by welding the core with the help
ALUBANG can be punched by conventional sheet metal
punching machines or manual punches according to the
(5) Curving & Bending
Running saws and panel saws for woodworking can cut
ALUBANG panels easily. We recommend the carbide tip
blade made for aluminum and plastic.
After grooving, ALUBANG Panels can be easily folded
and shaped by various routing techniques.
Excellent compatibility with any silk-screening
All surfaces must be free from all dirt.
ALUBANG panels can be drilled with twist drills which
Normally used for aluminum and plastics on machines
(9) Routing & Grooving
It is important to leave 0.2 to 0.4mm of core material
U-grooving: namely, the remaining thickness becomes
0.7 to 0.9mm. A carbide tip should be used and we
recommend 110° of a grooving angle for 90 ° bends.
Panel saw or NC router is suitable for mass grooving